REHAU / PVC windows and balcony doors
ARTEVO
REHAU’s premium 80 mm platform with RAU-FIPRO X composite reinforcement for energy-efficient windows, large insulating glass units and contemporary architecture.
Manufacturer imageREHAU ↗
KEY PARAMETERS
Read ARTEVO figures in the context of the actual window.
ARTEVO offers strong thermal and structural potential, but the right build-up depends on sash format. A small window rarely needs the most elaborate catalogue configuration; a large sash, on the other hand, deserves a separate check of glass, reinforcement and hardware.
Installation depth
80 mm
Visible width
106–184 mm
Frame Uf
up to 0.97 W/m²K · 0.79 max
Element Uw
up to 0.61 W/m²K*
Infill / glazing
up to 56 mm · 72 mm flush
Sound insulation
up to 48 dB
Air permeability
class 4
Watertightness
class 9A
Wind resistance
B5 / C5
Burglary resistance
up to RC3
* REHAU values relate to specific tested assemblies. The project specification should state the performance for the selected geometry, glass unit and reinforcement strategy.
Official manufacturer data · checked 09/2026Open official source ↗
PROFILE CROSS-SECTION
ARTEVO profile geometry in detail.
This official manufacturer image reveals the system's profile geometry, chambers, thermal breaks and glazing zones. The final junction is selected for the opening scheme, glass build-up, dimensions and project loads.
ARCHITECTURAL USE
Where this system makes sense.
According to REHAU: air permeability up to class 4, watertightness up to 9A and burglary resistance up to RC3; exact classifications depend on size and configuration.
01
RAU-FIPRO X instead of excessive steel reinforcement
Glass-fibre reinforced composite increases profile rigidity and allows many configurations to reduce conventional steel reinforcement. This matters for larger sashes and heavier high-performance glazing.
02
ARTEVO max for maximum thermal performance
The max version adds REHAU LowE profile technology. REHAU publishes Uf values down to 0.79 W/m²K and Uw down to 0.61 W/m²K for a defined triple-glazed configuration.
03
Contemporary geometry and more daylight
Narrow and flush sash options are available, while KALEIDO COVER can add an aluminium exterior shell for a more restrained architectural appearance.
04
Barrier-free thresholds
The RAUCERO 0 mm threshold enables level transitions. The final detail still depends on correct substrate preparation, waterproofing and drainage.
ENGINEERING
The profile is only one part of the window.
For ARTEVO we do not stop at the profile Uf value. Sash geometry, glass inertia, setting blocks, hardware, fixing points and inner glass-edge temperatures all matter. Large elements are checked separately to determine whether composite-only or additional steel reinforcement is appropriate.
How we engineer ↗HOW TO READ THE DATA
Six values that shape the result.
A catalogue maximum is not the rating of every fabricated element. Classes depend on size, opening scheme, glazing, hardware and the tested configuration.
START A PROJECT
Choose ARTEVO around the real openings, not around the headline figure.
Send the window schedule or elevations. We will separate standard elements from oversized sashes and review glazing, reinforcement, hardware and frame position.
Send project ↗